BL10 Two Post Lift
With double telescoping screw pads, plated arm restraints and pins the BL10 will accommodate the rigorous demands of a full service facility.
With the economic choice of the BL10 you can afford to grow with its competitive price.
Available in blue only
BL10 Features & Benefits :
• 3-stage front arms and 2-stage rear arms provide a wide arm sweep for :
» Symmetric lifting
» Uni-body design vehicles
» Vehicles with designated outside lift points
» Wider vehicles
» Low profile vehicles
» Both short and long wheelbases
• 11’ 11-7/8” standard height fits in service bay with 12’ ceiling height
• Double Telescoping Screw Pads adjust to multiple heights minimizing the need for adapters
• Rubber foot pads minimize stress to vehicles with delicate undercoatings
• Padded overhead shut-off system prevents vehicle damage
• Single-point mechanical lock release system allows the technician to disengage both columns simultaneously
• Rubber door guards protect vehicles from door damage
• Plated Arm Restraints and Arm Pins inhibit rust and provide long-lasting durability
BL10 Specifications :
| Model Number | BL10 |
| Lifitng Capacity* | 10,000 lb. (4536kg) |
| A. Rise Height!1 | 743⁄4” (1900 m |
| B. Overall Height | 153 3/4” (3906mm) |
| C. Overall Width | 140 5/16” (3564mm) |
| D. Drive-thru Clearance | 106 1⁄8” (2695mm) |
| E. Floor to Overhead Switch | 147 1/16” (3735mm) |
| F. Arm Reach (Min.) | Front Arm 22 1⁄16” (580mm) – Rear Arm 39 3⁄8” (1000mm) |
| G. Arm Reach (Max.) | Front Arm 35 13⁄16” (910mm) – Rear Arm 51 3⁄16” (1300mm) |
| H. Adj. Screw Pad Height | 4 5⁄16″ – 611/16″ (110 – 160mm)2 |
| Adj. Adapter Height (with 3” Extensions and Screw Pad) | 7 1⁄4″ – 9 3⁄4″ (181 – 235mm) |
| Adj. Adapter Height (with 6” Extensions and Screw Pad) | 10 1⁄4″ – 12 3⁄4″ (257 – 311mm) |
| I. Inside of Columns | 118 1/8” (3000mm) |
| Motor | 2HP, Single Phase, 60Hz |
| Voltage | 208 – 230v |
| Speed of Rise | 50 Seconds |
| Max. Load Per Arm | 2,500 lb. (1134kg) |
| Ceiling Height Required | 12′ (3658mm) |